Flute Tuning Form

Please use this form to tell me your finger spacings so that I can make you a flute which you can play straight away.

2015-02-10 21.48.33-1To get the finger measurements, see the picture at the left. Tape a piece of paper to a broom handle, and mark the top and bottom. Place the fingers of your left hand near the top, so that they are comfortably spaced and not stretched. Make a mark at each fingertip. Now place your right hand near the bottom of the paper and do the same. It doesn’t matter how far apart your left and right hands are.

Once you have six marks, number them 1-6 (bottom to top). Measure the spaces between the holes in millimetres.

On the form, Finger Space 1 is between holes 1 & 2 (the bottom two). Finger Space 2 is between holes 2 & 3. Finger space 3 is between holes 4 & 5, and finally Finger Space 4 is between holes 5 and 6 (the top two). (Example)

Please indicate on the form if you’d like 432Hz tuning.

[contact-form to=’Flutes@stonelaughter.co.uk’ subject=’Tuning holes for custom order’][contact-field label=’Name’ type=’name’ required=’1’/][contact-field label=’Space 4 (Between holes 5 %26amp; 6)’ type=’text’ required=’1’/][contact-field label=’Space 3 (Between holes 4 and 5)’ type=’text’ required=’1’/][contact-field label=’Space 2 (Between holes 2 %26amp; 3)’ type=’text’ required=’1’/][contact-field label=’Space 1 (Between holes 1 %26amp; 2)’ type=’text’ required=’1’/][contact-field label=’432Hz Tuning please’ type=’checkbox’/][/contact-form]