OK so now we actually begin making! But – we need to know what we’re going to make first. This depends on what key we want the flute to be in. The keys are usually referenced with “Middle C” on the piano, also called “C4”. A C4 flute would be an extremely low pitched flute […]
Archive | Making Flutes Series
RSS feed for this section2 – Understanding your flute
So – this cut-away diagram is from the side of the “business end” of your flute… click it for a bigger version. The flute is made by joining two pieces of wood together after shaping them on the inside; that’s where the “join” on the drawing is. Figure 1 shows a static flute which is […]
1 – Stuff you need, and Wood
Before you begin making a flute, there’s a lot of stuff you’ll need, more stuff you’ll find useful, and yet more stuff which just makes life a little easier. Then of course, you’ll need the right wood. Now – it’s true that given a stick and a good knife, you can probably make a pretty […]
How to Make a Native American Style Flute – Series Introduction
As promised, I’m starting my series of posts about making Native style Flutes. Here is the list of posts in the series. 1. Stuff you need, and Wood. 2. Understanding your Flute 3. Selecting a Bore and Preparing the “Flute Blank” 4. Marking and Routing. 5. Cutting the ramp & flue. 6. Cutting the True Sound Hole; […]